Deployment backup

The latter is a one-on-one copy of . The original owner deserves *ALL* the credits. This is just a backup.

I have been asked to roll out 29 new Dell Optiplex workstations and thought I would share my experience working with WDS. I will be installing Windows XP Professional SP2 on all workstation and the method of choice is to install WDS on the SBS 2003 server. I first verify the I had a server running Server 2003 SP2 and in my case I used Windows Small Business Server 2003 SP2.

Step 1 – Installing WDS on your Windows 2003 Server SP2

* Logon to the Server with Domain Administrator rights
* Navigate to the control panel and click Add/Remove Programs
* Click Add/Remove Windows Components
* Scroll down and check Windows Deployment Services
* Click Next and Finish (once installed WDS can be found under Administrative Tasks)

Step 2 – Configure Windows Deployment Services

* Navigate to Start > All Programs > Administrative Tools > Windows Deployment Services (WDS MMC should appear)
* Expand Server and right click [sever name] and click Configure Server
* Click Next to start the Wizard
* Check the Path if needed (I used D:\Remoteinstall because of disk space on system drive C:)
* For DHCP Options 60 Check both “Do not listen on Port 67″ and “Configure DHCP option 60 to “PXE Client” and Click Next
* For PXE Server Initial Settings select “Respond to all (known and unknown) client computers” and click Finish

Step 3 – Download and Install Business Desktop Deployment 2007 (BDD 2007)

* Open a web browser and navigate to
* Save download locally to the server and install
* Once installed you will need to launch Workbench and added any required components

Step 4 – Install OS and all needed Applications (excluding Windows Media Player 11)

* Enable network boot option in BIOS
* Install Operating System – In my case I installed a Volume Copy of Windows XP Professional SP2
* Join to the Domain and install needed Application and Updates
* Remove from Domain

Step 5 – Setup Boot Image in WDS

* Create a folder on the sever to copy two WIM files to (WinPE.WIM and Boot.WIM)
* Insert a Vista Business DVD in to the DVD-ROM drive and browse the Disk for a file called Boot.WIM and copy to folder recently created folder
* Navigate to Program Files\Windows AIK\Tools\PETools\x86\WinPE.WIM and Copy to recently created folder
* Now I opened up WDS expanded Server and right clicked the Boot Image Folder and Clicked Add Image
* Browsed to Boot.WIM and click OK
* Repeated for WinPE.WIM and click OK
* Next, In WDS I right clicked WinPE and Clicked Capture Image
* Finally, In WDS I created a Master Image Group called “Windows XP Image”

Step 6 – Sysprep the Master Image

* To Run the sysprep I inserted the XP Professional SP2 Disk and Browsed to the file (in my case it was D:\Support\Tools\
* I used WinZip to extract the file to a new folder I created called sysprep (C:\sysprep
* Navigate to the C:\sysprep folder and launch setupmgr.exe
* Click Next to Start the Wizard
* Select “Create new” and click Next to continue
* Select “Sysprep setup” and click Next to continue
* Selct “Windows XP Professional” and click Next to continue
* Select “No,do not fully automate this installation” and click Next to continue
* For Gernerl Settings enter the Name and Organization, Display Settings (default), enter the Time Zone applicable and then enter the Product Key
* For Network Settings select “Automatically generate computer name, Select “Use the following Administrator password (127 characters maximum ; case-sensitive” and enter local administrator password and confirm. Select Typical settings and finally select Workgroup.
* For Advanced Settings specify Country or region, enter area code, Regional Settings select “Specify regional settings in the answerfile” and check ”Customize the default regional settings” Click Custom and verify and enter sysprep Identification String (example Windows XP Deployment for Dell Optiplex 755 112007)
* Click Finish and OK
* Click Cancel to Close Setup Manager ( This is an annoying microsoft glitch)
* Now runs Sysprep by navigating back to c:\sysprep and launch sysprep.exe
* Click OK to Continue
* The System Preparation Tool 2.0 windows should appear. Check “Use Mini-Setup and then Click Factory
* Once PC shuts down press the power button to restart the PC (PC will take some time to reboot)
* Once at the Desktop Click Reseal and OK to Shutdown the PC
* PC should Shutdown (do not boot to windows you need to PXE boot and capture the image
* Sysprep is Complete

Step 7 – Create Master Image for WDS

* Boot up the PC that you want to image and press F12 to enter Boot Menu
* Select Onboard Network Controller and press Enter
* Press F12 again to Boot from network
* Select Windows Vista PE (x86) and press Enter
* From the command prompt type wdscapture.exe
* Click Next to start the WDS Image Capture Wizard
* In the Image Capture Source use the dropdown to select the volume to capture (in my case it was C:\) and enter an Image Name and Image Description. Once complete click Next
* In the Image Capture Destination you will need to browse to a local Destination ( I had problems finding the WDS server when I checked “Upload image to WDS server:”)
* Click Finish to begin capturing Image
* Once I had the Image I restarted the Master-Image PC and Join to Domain
* I copied the image file to a local directory on the WDS server
* Once complete I opened WDS and expanded Servers> [Server Name] > Install Image
* Right Click Install Image Group and Select Add Install Image
* Browse to the Image and Click OK to upload the Image to WDS

Step 8 – Image New PC

* Press F2 to access the BIOS and make sure that PXEboot is enabled on the NIC
* Press F12 to access the Boot Menu
* Select “Onboard Network Controller”
* After DHCP issues IP address press F12 to continue
* Select “Microsoft WindowsVista PE (x86)” and press Enter
* Once wpeinit launches type the following:
o Diskpart
o Select disk 0
o Clean
o Exit
* Type exit to let system restart
* Press F12 and Boot from Onboard Network Controller
* Press F12 to continue
* Select “Microsoft Windows Longhorn setup (x86)” and press enter
* Click Next to start the WDS wizard
* Enter the domain administrator’s credentials and click OK
* Highlight the Master Image and Click Next
* Highlight Disk0 and Click Next – Installation will begin
* After PC reboots the windows setup should appear click Next to begin
* Select “Yes, I accept” to click Next
* Enter the product Key and click Next
* Enter Computer Name and click Next
* Enter and confirm the local administrator password and click Next
* Select No, don’t make this computer part of a domain and click Next
* Click skip and slect No, not at this time and click Next
* Click Finish
* Once PC reboot confirm that you can logon to the desktop as a local administrator
* Reboot in to the BIOS and disable Network PXE

Dit bericht is geplaatst in Daily stuff met de tags , , , . Bookmark de permalink.